راسخون

ساخت كانكشن Adsl در لينوكس

samsam کاربر طلایی1
|
تعداد پست ها : 50672
|
تاریخ عضویت : بهمن 1387 
در توزیع هایی مثل فدورا ردهت و centos به دنبال گزینه network در کنترل پنل یا administration بگردید. سپس پس از باز کزدن آن گزینه NEW را انتخاب کنید. در صفحه جدید در قسمت Device Type گزینه xDSL connection را انتخاب کنید و forward کنید. بقیه آن هم که مثل ویندوز است. ابتدا کارت شبکه ای که به مودمتان متصل است و سپس نام و رمز و تمام .... در آخر حتما در قسمتactivate صفحه network configuration را بزنید تا شبکه شما فعال شود.
hadisafari کاربر نقره ای
|
تعداد پست ها : 43
|
تاریخ عضویت : اسفند 1388 

لطفاً روش اتصال Dial Up در اوبانتو را توضیح دهید.

در بخش گرافیکی این امکان وجود ندارد و دستورات بخش Terminal(خط فرمان) هم جواب نمی دهند.

فقط دستور wvdial شماره گیری را آغاز می کند ولی متصل نمی شود.

لازم به ذکر است تنظیمات اتصال را طبق سایت Ubuntu انجام داده ام.

fetrat کاربر نقره ای
|
تعداد پست ها : 580
|
تاریخ عضویت : بهمن 1388 

سلام دوست عزیز روش های گفته شده در لینک های زیر رو امتحان کنید.

لینک 1

لینک 2

 

Ubuntu includes some useful utilities to get your dial-up connection up and running.Here is the following ways you can connect to your dialup connection

1)Using your networking option in Ubuntu

2)using gnome-ppp

3)using kppp (For Kubuntu)

4)using wvdialconf & wvdial

5)using pppconfig & pon/poff

first thing you need to make sure your modem drivers are installed or not.If you want more details about modem drivers in ubuntu and installation check here

Now we will see 3 ways how to configure dialup connection in ubuntu

Before Starting

Before configuring Dial-up connection you need to have the following information from your ISP

1)Username

2)Password

3)Dail-in number

Configuring a Dial-Up Connection using Networking option

you can go to System—>Administration —>Networking


Once it open the application you should see the following screen

In the above screen select modem connection option and click on properties you should see the following screen

The first thing you will need to do is to enable the connection by ticking the Enable this connection box,now you need enter your ISP’s phone number as well as your username and password

Next, click on the modem tab to specify details about your modem and also configure the speaker volume. Most telephone systems use tone dialling nowadays, so make sure this is selected . I have selected the speaker volume on medium.

Now you need to click on options tab If you are using a , then you will probably want to uncheck Set modem as default route to the Internet whilst you are on a LAN, otherwise you may struggle to see anything! Tick it when you are expecting to use your dial-up connection though, and Ubuntu will use this connection to get out onto the Internet.You need to select other two options checked.

Now You can use the Gnome Modem Monitor and Network Monitor panel if you want to stop, start and monitor modem connections.

 

من خودم امتحان نکردم.